Access Controller
In the properties of the access control block the 1-wire Extension that has got the iButton reader connected must be selected. Select which user groups have got access permissions and also set the times for each group. (Periphery tree > user groups)
(Sel) input to identify the iButton reader if multiple are connected to the same 1-Wire Extension. Following a pulse on (Sel) the permissions for this block are used to verify the identity of the iButton for the duration of (Dsel)
Table of Contents
| Abbreviation |
Summary |
Description |
Value Range |
| Sel |
Select access controller |
Pulse to select access controller (when using multiple access controllers) |
0/1 |
| Eid |
External Authentication ID |
This External Authentication ID can be provided e.g. by a fingerprint through a virtual input. This ID must be present in the user authentication. |
- |
| Off |
Off |
Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. |
0/1 |
Outputs↑
| Abbreviation |
Summary |
Description |
Value Range |
| P |
Permission given |
Activates output for the duration set in parameter (Pd) when permission is given. |
0/1 |
| Txt |
Providing the last authorisation details |
|
- |
| Pd |
Permission denied |
Activates output for the duration set in parameter (Pd) when permission is denied. |
0/1 |
Parameters↑
| Abbreviation |
Summary |
Description |
Value Range |
Default Value |
| Dsel |
Duration Access Controller selected |
If (Dsel) = 0 the authentication check is carried out immediately, (Sel) is not used. |
∞ |
0 |
| Pd |
Pulse duration |
Pulse duration of outputs (P), (Pd). |
∞ |
3 |