Up Counter
Simple counter with limit
Tip: If (M) = 1 the counter will only start over if a reset (Off) is triggered or (M) is set to 0.
Table of Contents
| Abbreviation |
Summary |
Description |
Value Range |
| C |
Count |
Pulse increases (V) by 1. |
0/1 |
| Off |
Off |
Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. |
0/1 |
Outputs↑
| Abbreviation |
Summary |
Value Range |
| Lr |
1 when (V) = (L) |
0/1 |
| V |
Counter value |
∞ |
Parameters↑
| Abbreviation |
Summary |
Description |
Value Range |
Default Value |
| Rem |
Remanence input |
Remanence input: If active, the function block retains its previous state after a Miniserver reboot. |
0/1 |
0 |
| L |
Limit |
|
∞ |
1000 |
| M |
0 = counter loops automatically, 1 = counter stops at limit |
|
0/1 |
0 |