Leaf Tree¶
- Knowledge Base
- Devices
- Leaf Tree
The Leaf Tree is a decentralized ventilation unit with heat recovery that is controlled via Loxone Tree technology. Several units are combined, providing room ventilation. More information about the operating method and a configuration tool for the recommended number of units can be found on the website of our cooperation partner: Leaf Ventilation.
Table of Contents¶
- Mounting
- Commissioning
- Maintenance, filter replacement
- Inputs, Outputs, Properties
- Safety Instructions
- Documents
Mounting↑¶
Install the device according to the manufacturer's installation and operating instructions.
Connect the 24V DC power supply and Tree communication wires. Shortly after power-up, the status LED will blink orange if the wiring is correct (connection to Tree Extension and Miniserver is established).
Commissioning↑¶
Then follow the pairing procedure on the Tree Interface.
Maintenance, filter replacement↑¶
The fan filter must be replaced or cleaned at regular intervals based on the maintenance manual. The filter change interval can be defined in the Leaf 1 properties. This setting is 3 months (2200h) by default. The actual run-time of the fan is considered. You will be notified of an upcoming maintenance in the user interface.
Actuators↑¶
| Summary | Unit |
|---|---|
| API Connector | Text |
Diagnostic Inputs↑¶
| Summary | Description | Unit | Value Range |
|---|---|---|---|
| Online Status Leaf Tree | Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions | Digital | 0/1 |
| Filterwarnung | Digital | 0/1 | |
| Fan error | Digital | 0/1 | |
| Aperture Error | Digital | 0/1 |
Properties↑¶
| Summary | Description | Value Range | Default Value |
|---|---|---|---|
| Monitor online status | If checked, you will be notified via System Status or the Mailer if the device is no longer available or goes offline. | - | - |
| Serial number | Specifies the serial number of the device. | - | - |
| Filter Change Interval | After this time (in hours) the filter warning becomes active. | ∞ | 2200 |
Safety Instructions↑¶
The installation must be carried out by a qualified technician in accordance with all applicable regulations.
Please note the safety instructions in the following installation and operating manual.
Documents↑¶
Installation and operating instructions with technical data