LED Spot WW Tree Gen. 1¶

The LED Spot WW Tree is a recessed LED spot with warm white light for 24VDC supply. The connection to the Miniserver is via Loxone Tree technology.

Table of Contents¶

Switch off the supply voltage before installation.

Connect the power supply (orange/white wire) and Tree communication wires (green/white wire).

Flip the spring clips back and snap the spotlight into the mounting hole. Make sure that no wires are jammed.

Summary	Description	Value Range
Smart Actuator WW	Smart actuator	∞

Summary	Description	Unit	Value Range
Online Status LED Spot WW Tree Gen. 1	Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions	Digital	0/1

Summary	Description	Default Value
Monitor online status	If checked, you will be notified via System Status or the Mailer if the device is no longer available or goes offline.	-
Serial number	Specifies the serial number of the device.	-
Actuator Type	Use device with Standard Actuator(s) or Smart Actuator(s) Smart Actuators support dynamic fade times and can only be used with the Lighting Controller.	-

The installation must be carried out by a qualified technician in accordance with all applicable regulations.

Ensure that the device is protected from water.