Paketsafe Air

The Paketsafe allows the safe deposit of packages delivered in your absence. Via the connection to the Loxone system you will be notified about newly delivered packages.

The Paketsafe Air is no longer available.

Datasheet Paketsafe

Table of Contents

Mounting↑

We recommend installing the Paketsafe at a location that is easily visible and accessible for the carrier. Please also consider the space required by the filled bag. Please follow the installation instructions, which you will find at the bottom of this page.

Finally, connect the power supply (orange/white terminal) or insert the two AA batteries.

Commissioning↑

In delivery state, pairing mode will be active after the power supply has been established. This is indicated by the status LED flashing red/green/orange.

Then follow the pairing procedure on the Air Interface.

To activate the pairing mode manually, hold down the pairing button for at least 5 seconds after establishing power supply.

The available functions differ depending on whether the device is battery operated or connected to an external power supply. This is determined during pairing. The device must therefore be paired in the same supply method in which it is to be operated later.
If the supply method is changed later, the device must be deleted from the programming and paired again.

Programming↑

For programming the device, the Packetsafe function block is used. Drag the device from the peripheral tree to the programming page to create the block.

Actuators↑

Summary Unit
API Connector Text