PI-Controller

Proportional Integral Controller
The I share is responsible for an exact adjustment to this value.

Table of Contents

Inputs↑

Abbreviation Summary Description Value Range
PV Process value Actual value of the controlled variable. ∞
Auto Automatic 0 = Manual 1 = Automatic 0/1
Off Off Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. 0/1

Outputs↑

Abbreviation Summary Description Value Range
CO Controller output Output of the controller for manipulating the controlled variable. ∞

Parameters↑

Abbreviation Summary Description Unit Value Range Default Value
Rem Remanence input Remanence input: If active, the function block retains its previous state after a Miniserver reboot. - 0/1 0
SP Setpoint Setpoint of the controlled variable. - ∞ 5
St Sampling time At this interval, the controller calculates new values for (CO). s 0...∞ 1
Th Threshold Used to suppress small control differences between (PV) and (SP). If the difference is less than the threshold, no new value is calculated for (CO). This helps avoid any unnecessary load on the actuator. - ∞ 1
Kp Proportional gain - ∞ 2
Ki Integral gain - ∞ 1
Mv Manual value When (Auto) is 0, this value is output at (CO). - ∞ 5
Min Minimum Specifies the minimum output value for (CO). - ∞ 0
Max Maximum Specifies the maximum output value for (CO). - ∞ 10