Selection Switch (+/-)
A pulse on input (+) / (-) increases / decreases the value on output (O) by the step size (Sts) in between (Vmin) and (Vmax).
A long-click on (+) / (-) increases / decreases the value on output (O) every (Rr) seconds by step size (Sts).
Table of Contents
| Abbreviation |
Summary |
Description |
Value Range |
| + |
Value+ |
Increases value on output (O) by step size (Sts). |
0/1 |
| - |
Value- |
Decreases value on output (O) by step size (Sts). |
0/1 |
| V |
Set value |
Sets a specific value on output (O). |
∞ |
| Off |
Off |
Pulse: Output (O) is reset to the default value (Vdef). On: Block is locked. Dominating input. The name of the connected sensor is used in the user interface. |
0/1 |
| DisPc |
Disable periphery control |
Disables all inputs when On. (e.g Child lock, cleaning) Control via user interface is still possible. |
0/1 |
Outputs↑
| Abbreviation |
Summary |
Description |
Value Range |
| O |
Output |
|
∞ |
| AC |
API Connector |
Intelligent API based connector. |
- |
Parameters↑
| Abbreviation |
Summary |
Description |
Unit |
Value Range |
Default Value |
| Rem |
Remanence input |
Remanence input: If active, the function block retains its previous state after a Miniserver reboot. |
- |
0/1 |
0 |
| Vmin |
Minimum value |
|
- |
∞ |
1 |
| Vmax |
Maximum value |
|
- |
∞ |
10 |
| Sts |
Step size |
|
- |
∞ |
1 |
| Rr |
Repetition rate |
Long-click on (+) / (-) increases / decreases the value on output (O) every (Rr) seconds. |
s |
0...∞ |
0,2 |
| Vdef |
Default value |
Default value when input (Off) is triggered. |
- |
∞ |
1 |
Timing Diagram↑
