Switch¶
- Knowledge Base
- Function Blocks
- Switch
The Switch function block is used to toggle a digital output.
It can be controlled by a pushbutton or other logic, and via the user interface.
Table of Contents¶
Inputs↑¶
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| Tg | Toggle | Switches output (O) on / off. | 0/1 |
| Off | Off | Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. The name of the connected sensor is used in the user interface. | 0/1 |
| On | Switches output (O) on. | 0/1 | |
| DisPc | Disable periphery control | Disables all inputs when On. (e.g Child lock, cleaning) Control via user interface is still possible. | 0/1 |
Outputs↑¶
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| O | Output | 0/1 | |
| Off | Pulse when output (O) is switched off. | 0/1 | |
| On | Pulse when output (O) is switched on. | 0/1 | |
| AC | API Connector | Intelligent API based connector. | - |
Parameters↑¶
| Abbreviation | Summary | Description | Value Range | Default Value |
|---|---|---|---|---|
| Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. | 0/1 | 0 |
Timing Diagram↑¶
Presence Simulation↑¶
This function block has a presence simulation.
