Wever & Ducré Light Tree¶
- Knowledge Base
- Devices
- Wever & Ducré Light Tree
Wever & Ducré Light Tree is one of the Loxone Tree compatible luminaires from Wever & Ducré.
Table of Contents¶
Commissioning↑¶
Please follow the manufacturer's instructions for mounting, installation, and power supply to the Luminiaire.
Connect the luminaire to the Loxone system via a Tree Interface.
For commissioning, the device must be supplied with power and a connection to the Miniserver must be possible via the Tree Interface.
Then follow the pairing procedure on the Tree Interface.
Actuators↑¶
| Summary | Description | Unit | Value Range |
|---|---|---|---|
| Smart Actuator | Smart Actuator for controlling lighting via compatible Lighting function blocks. | % | 0...100 |
Diagnostic Inputs↑¶
| Summary | Description | Unit | Value Range |
|---|---|---|---|
| Online Status Wever & Ducré Light Tree | Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions | Digital | 0/1 |
Properties↑¶
| Summary | Description | Default Value |
|---|---|---|
| Monitor online status | If checked, you will be notified via System Status or the Mailer if the device is no longer available or goes offline. | - |
| Serial number | Specifies the serial number of the device. | - |
| Actuator Type | Use device with Standard Actuator(s) or Smart Actuator(s) Smart Actuators support dynamic fade times and can only be used with the Lighting Controller. | - |